Is Killer Coats Gel Polish HEMA free?

Yes. Killer Coats Gel Polish is HEMA-free and TPO-free. Removing HEMA is not a safety guarantee. Allergic sensitization can happen with any methacrylate when uncured product touches skin or when the product is not properly cured. We label HEMA-free as a fact, not a safety claim.

How many coats of Killer Coats Gel Polish do I need?

Two thin coats. Whites and brights cover in two coats without stacking. Sheer shades 54, 55, and 56 are formulated translucent and may need a third coat for full opacity.

How long does Killer Coats Gel Polish last?

Standard fill schedule is every 3 to 5 weeks. The polish lasts until the next fill. Regrowth creates mechanical imbalance at the cuticle area that leads to lifting at the proximal end. The polish does not break down. Variables that affect wear are tech technique, client nail plate condition, proper prep, and proper cure with the Pro Arch Rival Nail Lamp.

Why does my gel polish shrink after curing?

Shrinkage happens when polish is not properly cured. The film contracts as polymerization completes outside the lamp. Killer Coats is formulated for proper cure under the Pro Arch Rival Nail Lamp at 60 seconds per coat. If you see shrinkage, check bulb age and cure time.

Can I use Killer Coats Gel Polish over acrylic or hard gel?

Yes. Killer Coats works over acrylic enhancements, hard gel overlays, and tip systems. Buff the enhancement to a matte finish before applying base coat for adhesion.

Do I need a special lamp for Killer Coats Gel Polish?

Killer Coats is formulated and tested for proper cure under the Pro Arch Rival Nail Lamp. We cannot confirm proper cure with other lamps because we have not tested against them. Proper cure depends on the lamp's diode count, diode quality, and actual output, not the wattage printed on the box. Wattage is an electrical input number, not a measure of what reaches the nail. A lamp marketed as 240W does not output 240W of UV to the nail. The Pro Arch Rival Nail Lamp runs 53 diodes at 30W. Every Killer Coats cure time is based on that lamp. Using a different lamp means unknown cure conditions, and undercured product causes lifting, dullness, and skin sensitivity.

How do I prevent gel polish from lifting?

Lifting traces back to skipped or incomplete prep, oil or moisture on the nail plate, skin contact during application, undercured product, or mixing products from different brands whose chemistries were not designed to work together. Run through prep and cure first when troubleshooting, and use Arch Rival PREP, base, and the Pro Arch Rival Nail Lamp end to end.

Can I mix Killer Coats Gel Polish colors?

Yes. Killer Coats colors mix with each other freely. Mix on a clean palette, not in the bottle. Mixing across brands is not recommended because resin systems and pigment loads vary.

How do I remove Killer Coats Gel Polish?

File the top coat to break the seal, soak a cotton pad with pure acetone, wrap with foil, wait 10 to 15 minutes. Push off softened gel with an orangewood stick. Never scrape the natural nail. Buff lightly, wash, oil, done.

Does Killer Coats Gel Polish work for nail art and detail work?

Yes. The formula does not drag, bubble, or pool, which makes it suitable for full coverage and detail work like florals, French tips, and color blocking. For fine line art use Labyrinthine Gel Paint (Low HEMA), which is designed for brush precision.

How do I store Killer Coats Gel Polish?

Room temperature, out of direct sunlight. UV exposure breaks down photoinitiators in the bottle and shortens shelf life. Keep the brush wiped clean and the bottle neck free of dried product so the cap seals properly.

Why are some Crème shades sheer instead of opaque?

Shades 54, 55, and 56 are intentionally sheer nudes designed for natural-looking French tips and translucent overlays. They are formulated for translucency. The rest of the Crème Collection is full-coverage opaque.

How does Killer Coats Gel Polish compare to BIAB or builder gel?

Killer Coats Gel Polish is a pigmented gel polish for color application, not structural reinforcement. Builder gel adds thickness and rigidity to the natural nail. Apply Killer Coats over a cured builder gel base for color on a reinforced nail.

What is the shelf life of Killer Coats Gel Polish?

Sealed bottle shelf life is 24 months from manufacture date when stored at room temperature out of UV exposure. Once opened, expect 12 to 18 months of working life with proper storage and a clean brush.

What is the difference between gel polish and regular nail polish?

Regular nail polish is a solvent-based film that dries by evaporation. Gel polish is a UV/LED-cured methacrylate film that polymerizes under a lamp. Gel polish wears longer, requires a base coat and lamp cure, and removes by soaking in acetone instead of wiping with remover.

Does gel polish damage natural nails?

Gel polish does not damage the nail plate. Improper removal does. Forced peeling, aggressive filing, or scraping uncured gel pulls layers off the natural nail and causes thinning, white spots, and weakness. Soak-off removal in acetone for 10 to 15 minutes followed by gentle pushing prevents damage.

Is Killer Coats Gel Polish vegan and cruelty-free?

Yes. The Killer Coats formula contains no animal-derived ingredients, and the product is not tested on animals at any stage. Animal-derived ingredients are rarely used in nail products. Animal testing for cosmetics has been banned across the EU since 2004 and across 42 countries globally. We list these as facts, not differentiators, because they are the legal baseline.

Where is Killer Coats Gel Polish made?

Killer Coats sources raw materials from specialized chemistry suppliers. Photoinitiators come from Germany. Monomers, oligomers, and polymers come from Japan. Cosmetic-grade pigments come from established global manufacturers. Manufacturing meets GMPC certification (Good Manufacturing Practices for Cosmetics). Every Killer Coats product is registered with the CCNB (Canadian Cosmetic Notification Board) for the Canadian market.

Is Killer Coats Gel Polish certified or registered with regulatory bodies?

Manufacturing meets GMPC certification (Good Manufacturing Practices for Cosmetics). All Killer Coats products are registered with the CCNB (Canadian Cosmetic Notification Board) for sale in Canada. The formula is HEMA-free, TPO-free, vegan, and not tested on animals.

Is Killer Coats Gel Polish 7-free or 10-free?

The X-free arms race (3-free, 7-free, 10-free, 21-free) is fear-based marketing. Most ingredients on those lists were either removed years ago for regulatory reasons or were never present in the concentrations implied. We list what the formula IS (HEMA-free, TPO-free, GMPC certified, CCNB registered) instead of inflating an X-free count.

Is Killer Coats Gel Polish hypoallergenic?

No. We do not make that claim. Hypoallergenic means below average allergy potential, not no allergy potential. A 2017 study published in JAMA Dermatology (Xu et al., Northwestern University) found that 83 percent of products marketed as hypoallergenic contained at least one known allergen. The term has no regulated definition. All gel polish, including ours, is methacrylate chemistry. Sensitization can happen with any methacrylate when uncured product touches skin or when the product is not properly cured.

HEMA Free | TPO Free | 12ml

You are not here to troubleshoot polish.

You are here to get clients in and out of your chair. Killer Coats self-levels in two coats. No streaking. No sidewall flooding. No shrinkage. What you place is what cures. Pair it with Arch Rival PREP, base, top, and the Pro Arch Rival Nail Lamp. The system removes the variables. Fewer fixes. Fewer callbacks. More clients per day.

Everyone else is still reading the marketing. You just read the formulation.

Killer Coats Gel Polish — 046 Pixie Cloak

US$14.95

Quantity

Use within our matched and tested system

You are not here to troubleshoot polish.

Killer Coats Gel Polish — 046 Pixie Cloak

Join our mailing list